Check My Parts List on Speaker Recap

[corbin]

Trying to avoid paying twice for shipping so would appreciate if someone could double check my parts list for recap/upgrade of my EPI 70s (2 way with simple 1-cap crossover, like the more common EPI 100)

Here's what I've got so far:

Binding posts:
https://www.parts-express.com/dayton-audio-bpa-38g-hd-binding-post-pair-gold--091-1245

L-pad:
https://www.parts-express.com/speak...=1010X497171Xd6ede78af36935f656baf7bc369a82d3

10uF cap:
https://www.parts-express.com/dayton-audio-pmpc-10-10uf-250v-precision-audio-capacitor--027-244

The speaker didn't originally come with an L-pad, I'm adding one. I'm a little lost on what to use for the terminal plate, to which as I understand it the single cap and L-pad will also be attached. The stock plate is probably big enough to accommodate the new binding posts and L-pad but I can't bring myself to drill through the EPICURE branding, so I'd like to use something aftermarket. Also will presumably need some type of glue.

I have solder and am planning on reusing the old wiring.

 

[Tim64]

I would use this to house your l-pad so you can match the levels more closely. I would just solder the capacitor to the l-pad output. As for your binding post just drill the two holes through the cabinet so as not to damage the EPI name plate with the spring clips.

 

[corbin]

Tim, I'd prefer not to drill the cabinet if possible. I see the masonite boards like these:

http://tributeaudio.com/images/EPI Crossovers.jpg

Which I'd like to use.

 

[corbin]

Well, I ordered the stuff in the OP. Kind of wish I had ordered a fancy bypass cap too, oh well.

-Toby