Checking for imbalances on SX-1250

Discussion in 'Pioneer Audio' started by qguy, Jul 3, 2018.

  1. qguy

    qguy Super Member

    Messages:
    1,279
    Location:
    Manila, Philippines
    Not sure if it is the room as one speaker is in the corner. Is there a way to check if the Left and Right output is equal ?
     

     

    Please register to disable this ad.

  2. spark1

    spark1 Super Member

    Messages:
    1,213
    Location:
    The Great Midwest
    Response removed due to lack of interest.
     
    Last edited: Jul 4, 2018
  3. spark1

    spark1 Super Member

    Messages:
    1,213
    Location:
    The Great Midwest
    Response removed due to lack of interest.
     
    Last edited: Jul 4, 2018
  4. qguy

    qguy Super Member

    Messages:
    1,279
    Location:
    Manila, Philippines
    The left channel was stronger than the right channel, which was weird cause the Right channel speakers were near the corner, which should improve the bass response. Anyways, it may have been the loose banana plugs as when i dropped a piece of cardboard and hit the speaker wires, the plugs came loose. I removed the banana plugs and now using bare wire and the sounds is balance.
     

Share This Page