EICO HF-85 question

[Sam Cogley]

I know the faceplate on the HF-85 is mounted towards the top of the front structure, rather than centered. My HF-85 is missing the metal "box" portion of the structure, so I can't measure the fitment properly. As I'm considering building a wooden replacement for the sides and front, would someone please measure and post the distance between the faceplate edges and the edges of the "box"? :thmbsp:

 

[BrokenHill]

Let see, the top is .350, the left and right sides are about .475 to .495
and the bottom is at .750.
Measured from the edge of the brass face plate to the very outer edge
of the sheet metal case or front cover.

 

[Sam Cogley]

Excellent! Thank you very much!

 

[BrokenHill]

Your welcome. :thmbsp: