My Fisher SR-1015 was connected to my ceiling speakers and working fine. I disconnected the speaker wires to place it inside an entertainment system cabinet and when I reconnected the speaker wires to the Fisher system I don't get sound anymore. My wires are color coded, red, white, black and green. I inserted the wires as displayed in the photo. What I'm I doing wrong and causing my system.to have zero sound?
Fisher RS-1015 Speaker Connection Help
- Thread starter Silvana
- Start date
Are the speaker wires direct to the speakers or are there connections on a wall plate? You might have pulled them loose from a wall plate? Also they might not be all the way in the speaker connectors. Pull the speaker wire pair and meter each pair with an ohm-meter. If you have continuity (4 to 16ohms) on the speaker wires then the problem is in the RS-1015. Check the 2 1.5A slo blo fuses 1st with a meter (set to ohms). If no continuity go down to Home Depot or Lowes with the fuses and match up length and amps (make sure they are slo-blo). 250v fuses are fine.
