1. Time for some upgrades in server hardware and software to enhance security and take AK to the next level. Please contribute what you can to sales@audiokarma.org at PayPal.com - Thanks from the AK Team
    Dismiss Notice

Fisher SA-300-B knobs??

Discussion in 'Fisher' started by lilwing, Nov 8, 2018 at 10:29 AM.

  1. lilwing

    lilwing CAGE FREE AUDIO ZOO Subscriber

    Messages:
    1,152
    Location:
    Forest Grove, OR
    What do the R/L channel balance knobs look like? A picture?
    Do any of you know where I can get a couple?
    The shafts are very small and splined.
     

     

    Please register to disable this ad.

  2. rufleruf

    rufleruf AK Subscriber Subscriber

    Messages:
    1,116
    I don't think they came with knobs, but if they did, maybe the same as an 80az?

    My SA300 doesn't have any...
     
  3. lilwing

    lilwing CAGE FREE AUDIO ZOO Subscriber

    Messages:
    1,152
    Location:
    Forest Grove, OR
    I know they did. I've found a couple images but not sharp enough to see clearly.
    But I think you are right. Same as the big monos.
     
  4. rufleruf

    rufleruf AK Subscriber Subscriber

    Messages:
    1,116
    From my 80az - I feel like I've seen these on AR speakers.

    C0619D23-FD74-412A-9BBD-89A9227D63E8.jpeg
     
    Last edited: Nov 8, 2018 at 9:06 PM
  5. rufleruf

    rufleruf AK Subscriber Subscriber

    Messages:
    1,116
    There are some 80AZ knobs listed on ebay but they look different to me - they have a set screw - the one above doesn't
     
  6. dcgillespie

    dcgillespie Fisher SA-100 Clone Subscriber

    Messages:
    9,703
    Location:
    Ball Ground, GA
    I've never seen an SA-300 -- B or otherwise -- that had knobs on the level controls, nor has any Fisher literature (owners manual or marketing material) I've seen shown any either.

    Dave

    _sa300b-1.jpg
     

     

    Please register to disable this ad.

  7. Dave451

    Dave451 AK Subscriber Subscriber

    Messages:
    1,131
    Location:
    Philly area
    The 300B I worked on had no knobs, either.
     
  8. rufleruf

    rufleruf AK Subscriber Subscriber

    Messages:
    1,116
    If you want to add period correct "what they would have used if they did come with them" knobs- the knobs on an 80AZ fit the spline perfectly and look the part. Not that these will prove easy to procure, but they are a Dakaware knob, so they likely got used on a lot of US made stuff in the late 1950's.
     

Share This Page