I have an A 60 model amp that came out of an Ambassador console circa 1962 -- it sounds good as it is now. I would like to have someone familiar with restoring tube amps in general and Fisher in particular, go through it and maybe update the jacks and replace anything out of spec or to upgrade. Any suggestions? Thanks for your help.
Fisher tube amp restore
- Thread starter eckans1
- Start date
A location in your profile will help us decide who might be able to help you. If you live on the West coast, an East coast guy wouldn't be the best as you'd have to ship both ways (and they ain't cheap, either) and vice versa..
To clarify the A60 refers to the unit model #. 660A is the actual model # of the amp. See the Service & Owners manual here. http://www.fisherconsoles.com/ambassador IV.html
If it's been modified to run alone, then it's probably been overhauled to updated spec. There aren't that many parts to update in these. Upload a couple pictures of the underside. This will give us a better idea of what you are needing.
To clarify the A60 refers to the unit model #. 660A is the actual model # of the amp. See the Service & Owners manual here. http://www.fisherconsoles.com/ambassador IV.html
If it's been modified to run alone, then it's probably been overhauled to updated spec. There aren't that many parts to update in these. Upload a couple pictures of the underside. This will give us a better idea of what you are needing.
