G6000 no sound

91firebird

Super Member
Well went run my G6000 no sound has set for over 6 months,has sound from head phones but no speaker
Out put.guess I need to pull it out of the stack and check speaker out put fuse.it worked fine when last used.
 
Can't remember for sure, but I think these have fuse resistors on the amp board and I think there is one on the preamp that causes problems. Read up here on fuse resistors and see what you can find.
 
"Exercise" all the switches and pots. Be sure the tape monitors are in the correct position.

Please post the serial number for the database. Click on the link in my signature block.

- Pete
 
If you have sound in the headphones then there's nothing wrong with the amplifier as they use the poweramp through big resistors to drive the headphones, so I'd be checking out that the speaker outputs are turned on.

Perhaps try speaker B instead of speaker A to see if this changes anything.
Then if still no sound, you'll have to dig deeper.

Let us know how you get on....
 
Back
Top Bottom