HEELLP! MR77 guru's.......

usblues101

Member
Having trouble getting the perforated covers off.Looks like 4 screws.....theres a release but don't want to force it[per my guy].......what to do?I thank you guys in advance......Bob
 
I own one of these. Just make sure you use a screwdriver that has a tip which fully fits in the slots. If the blade is too small (especially the thickness of the blade) and there is slop, you will tear up the slot of the screw and be in real trouble. Sorry, I don't have any suggestions on how to loosen the threads.
 
And you didn't provide any insight into AC's response? Curious minds want to know.
 
Last edited:
Curious mind(s) would also like to know the size and pitch of the tiny screws that affix the four corners of the metal faceplate “frame”.

Thank you.
 
Curious mind(s) would also like to know the size and pitch of the tiny screws that affix the four corners of the metal faceplate “frame”.

Thank you.
Front Screws.JPG

This info courtesy of RR-artifacts.com
 
Back
Top Bottom