HR7 Remote control

formariz

New Member
I have used a CR7 unit with the HR7 remote for years, but now like it happens eventually to all remotes, the volume buttons are getting tired and unresponsive. Is this something that can be repaired ? Or is there another remote that would be able to be programed for this unit?
 
Suggest removing the button membrane from the board and inspect for debris on the board and contact pads.
 
@62caddy . Never thought about doing that since I really never had to go into any remote but that was it. Simple and easy. Sure enough there was some crud between those two contact pads and board. Five minutes, one Q tip, a little denatured alcohol and it is like new . Thank you so much.
 
Back
Top Bottom