I NEED YOUR HELP GUYS!!

Johnv67

New Member
http://imgur.com/a/2B1tl <--------pics there, I have a fisher 6410c I put the plate back on and messed something with that gear up big time I dont know what to do- now the semi automatic arm does not work/ does not turn off at the end of a record.... please help.
 
Just from looking at the pictures, are there "pins" that pop into that gear and move other parts? Is it possible you've reinstalled them incorrectly? How much disasembly was done?

Just because it fits back together doesn't mean the mechanism is aligned correctly...
 
Yes it seems like it should be attached to a pin or attached to something for that matter, right now it just is in there "floating". If i flip the player over to take the back off and look at it it moves around, so the problem is I can not figure out where it attaches to, I'm having trouble finding the manual and the closet model mentions it -but does not go into enough detail. not much was done, when I got the table the arm worked fine but there was an awful rumble/grind from the plate so i took it and the spindle off and oiled/cleaned then put back in, when i put the plate back on I knocked the gear loose.-- on the last two pics in there, you can sort of see a track kind of deal that goes in a circle kind of with grease in it, i just dont know what pin it sits on. https://www.vinylengine.com/library/fisher/mt-6335.shtml <--closest manual i could find as I cant find the proper one
 
Last edited:
Back
Top Bottom