Installing a new 2772 into an X1

Yes @Ronito6 those are the parts. The plugs third pin was going to filled with epoxy to ensure it is keyed correctly.

I would love to complete board and check fitment against the cards but have had to go abroad for two months on very short notice.

The plug comes in different orange colors. I did not check if you could match the header with the two shades of that orange. I wanted to go with natural both sides originally but could not due to long lead times. The two shades could ensure each side matched so you could not mix them up.
Improvement maybe possible.

Cheers
Gord
 
Back
Top Bottom