Jbl horn and midrange find

loudnclr

AK Member
Posted this on speakers but realized there is a jbl section, so here is what I have, came from a guy moving I know, big heavy horn tweeter I am guessing with 2425J on the rear driver and a 2118h midrange also have the cro0ssover parts and original cabinet, just wondering how good these parts are
 

Attachments

  • 003.JPG
    003.JPG
    95.8 KB · Views: 57
  • 001.JPG
    001.JPG
    102 KB · Views: 54
  • 002.JPG
    002.JPG
    98.5 KB · Views: 52
  • 004.JPG
    004.JPG
    106.8 KB · Views: 52
  • 005.JPG
    005.JPG
    50.7 KB · Views: 53
  • 007.JPG
    007.JPG
    108.6 KB · Views: 53
The screw holes and size of the driver in relation to the horn say it's a cut down 2342. With the right crossover, you can get it to play from 70Hz to 16kHz. The 2118 is good from 70-3000Hz. You can crossover at 2kHz (with horn compensation) to the horn or use the HF section of an L200T3 (crosses at 1200Hz) and work out a crossover for the 2118 - OR - you can put a big woofer under the two of them and work out a crossover for a three way

ME? I'd sell the drivers because they're orphans and the horn might be worthless now.
 
Last edited:
Back
Top Bottom