Kenwood model 11 recap

[Oscar23]

Ok and thanks for your help

 

[Oscar23]

I've gotten rid of the pop and the bias set it's preforming great still no lights I have 0mv at pin 5 and 0 at the fuse.
Could the fuse be blown that wire seems to be the only thing running through it.

 

[Oscar23]

There was a lifted trace on the amp board around q1 near a cap that was changed I tracked it and use copper wire to make a jumper

 

[Oscar23]

It sounds awesome great soundstage very clear and detailed. Its pushing a heavy load a set of image concept 200 and doing it with ease now just to get the lights working

 

[Oscar23]

The lights are working it was the fuse it's the only fuse so I assumed it was a main fuse. Now to find the right LEDs for it.My concern is keeping the orange strip at the bottom I put the LEDs in and it goes white. Its clear so it takes on the color of the led

 

[Oscar23]

Well finally finished it sounds incredible just wish I could find the top vent

 

[Andrew Page]

Looking good just have to keep your eyes open I guess.