1. Time for some upgrades in server hardware and software to enhance security and take AK to the next level. Please contribute what you can to sales@audiokarma.org at PayPal.com - Thanks from the AK Team
    Dismiss Notice

Large Vintage JBL Speaker ID help needed

Discussion in 'The Lansing Legacy' started by cnyel1967, Dec 3, 2018.

  1. cnyel1967

    cnyel1967 AK Subscriber Subscriber

    Messages:
    1,061
    Location:
    Ohio
    Unfortunately just the one picture available to me. Posted dimensions are approx

    33 x 24 x 21

    Any assistance is greatly appreciated!
     

    Attached Files:

    Johnny_Law likes this.

     

    Please register to disable this ad.

  2. Johnny_Law

    Johnny_Law AK Member Subscriber

    Messages:
    2,065
    Location:
    West LA
    That's an L200 or L200B. Get em!
     
  3. damacman

    damacman Blown and Injected Subscriber

    Messages:
    8,791
    Location:
    Gilbert, AZ
    Now how in the hell can you tell that? If you're right, you're good!
     
    donprice and Johnny_Law like this.
  4. Johnny_Law

    Johnny_Law AK Member Subscriber

    Messages:
    2,065
    Location:
    West LA
    Well, I look at mine every day. :p It's the only speaker to come in that cabinet with the distinctive walnut finish and inset grille.

    Here's that pic next to one I just snapped:

    [​IMG]
     
  5. cnyel1967

    cnyel1967 AK Subscriber Subscriber

    Messages:
    1,061
    Location:
    Ohio
    Fantastic! As always, AK is the best place to come when help is needed! Thanks again.
     
    Johnny_Law likes this.
  6. Marine0811

    Marine0811 I love it loud! Subscriber

    They would be keepers if I had them
     
    cnyel1967 likes this.

     

    Please register to disable this ad.

  7. nedseg

    nedseg AK Subscriber Subscriber

    Messages:
    511
    Location:
    Wisconsin
    Agreed - L200s. Veneer actually looks "ok"? Could be a great value, certainly worth a closer look!
     
    Alobar likes this.
  8. cnyel1967

    cnyel1967 AK Subscriber Subscriber

    Messages:
    1,061
    Location:
    Ohio
    Thanks- was on a local online auction site. Sold for over $800 (site unseen) including auction fee's . Probably inline with current values considering they likely needed some work...unfortunately too steep for my pockets at this time. Thanks to those that assisted! Maybe next time :)
     

Share This Page