Brian Malman
Member
Hi,
I'm replacing the electrolytics on the P100/P200 AM/FM Stereo board and there are a couple of 0.47uF / 50V electrolytic capacitors (3). . . I don't have the electrolytics in this value and might not have them in films either. I was just wondering whether or not I might be able to switch these out with 1uF / 50V Elnas or Nichicons instead. The manual shows no tolerances after these values, so I don't know whether the values have to be exact. Would anyone know whether or not I can go ahead and switch them out, or should I just leave the old ones in place?
Thanks for your help!
Brian
I'm replacing the electrolytics on the P100/P200 AM/FM Stereo board and there are a couple of 0.47uF / 50V electrolytic capacitors (3). . . I don't have the electrolytics in this value and might not have them in films either. I was just wondering whether or not I might be able to switch these out with 1uF / 50V Elnas or Nichicons instead. The manual shows no tolerances after these values, so I don't know whether the values have to be exact. Would anyone know whether or not I can go ahead and switch them out, or should I just leave the old ones in place?
Thanks for your help!
Brian