McIntosh Wood Case....or...?

Discussion in 'McIntosh Audio' started by mimalmo, May 14, 2018.

  1. mimalmo

    mimalmo I like big speakers Subscriber

    Messages:
    76
    Hi all, picked this up along with a MC2200 a while back but I don't know if it's the proper case (or even if it's a McIntosh case). Looking for some input from some folks that might recognize it.

    Approximate Exterior Dimensions
    17-1/4" wide
    14-1/2" deep
    8-1/8" tall (not including feet)
    9" tall (including feet)

    Approximate Opening dimensions
    15-3/4" wide
    6-5/8" tall
    14-1/2" deep

    Thanks!
    20180514_201056.jpg 20180514_201104.jpg 20180514_201212.jpg 20180514_201230.jpg
     

     

    Please register to disable this ad.

  2. chuckworkb

    chuckworkb AK Subscriber Subscriber

    Messages:
    3,147
    Location:
    CT
  3. mimalmo

    mimalmo I like big speakers Subscriber

    Messages:
    76
  4. twiiii

    twiiii Addicted Member

    Messages:
    5,369
    Location:
    west Texas
    It has the panloc mounting bracket cabinet flanges and the slanted legs so I would think it a cabinet for a 2105. As I remember by the time the 2205 came along the slanted full length legs were replaced by four plastic feet. The slanted legs didn't hold up that well with heavier amps. The L14 was replaced with the L 54 in 78 in the middle of the MC2205 run. It could also be an L21 according the Mcintosh Compendium you can access on this site.
     
    Last edited: May 14, 2018
    CruzBay likes this.
  5. mimalmo

    mimalmo I like big speakers Subscriber

    Messages:
    76
    Thanks for your input. I'll dig into the compendium further.
     

Share This Page