House de Kris
Loud-n-Deep
Another cable from DKak. This is a 3ft. cable made of Belden 1694A cable terminated with 75ohm BNC connectors. Not sure who made this cable. The cable was marked with a directional cable which I respected for these measurements.
The TDR shows an increadibly flat impedance at 75.22ohms. The network analyzer indicates that the -3dB point is 6.9GHz. On the side of the cable Belden has marked it as being 4.5GHz bandwidth. Further support that the cabling industry doesn't define bandwidth as the -3dB point as speculated in another "Measuring Digital Cables" thread. My measured -1dB point is 1.3GHz.
The TDR shows an increadibly flat impedance at 75.22ohms. The network analyzer indicates that the -3dB point is 6.9GHz. On the side of the cable Belden has marked it as being 4.5GHz bandwidth. Further support that the cabling industry doesn't define bandwidth as the -3dB point as speculated in another "Measuring Digital Cables" thread. My measured -1dB point is 1.3GHz.
Attachments
Last edited: