Need Help: Component Selection

[Phantom1]

Hello everyone. I recently obtained 2 x Audiosource amp 310. I would like help with understanding my further equipment needs to utilize these amps.

My existing setup contains a late Pioneer 7500 II amp and tuner along with a Sony 5 disc changer. all of this drives a set of Infinity Reference Six speakers.

I would like to power each speaker with each amp(if possible in bridged mode). I realize i need something between my amps and my sources. I was looking at AudioSource Amp 100 but I am not sure if that is the best route. Can you guys help? My budget is about $500 for a new piece.

Planned setup:

Source: Tuner, CD Changer
Mystery Box
2 Audiosource 310 Amps
2 Infinity Reference Six Speakers
Basic Speaker Specs:
Type: 4 way loudspeaker system
Frequency Response: 35Hz to 40kHz
Recommended Amplifier: 35 to 225W
Crossover Frequency: 200, 1500, 4000Hz
Impedance: 6Ω
Sensitivity: 90dB
Year: 1990


Also any help with ideas on how to put everything together are appreciated.
Thanks for your help.

 

[Phantom1]

I was thinking about using:
Nobsound® NS-01P Tube Preamp Preamplifier 12AX7 ALPS27

behind this:
Optimal Shop 4 Port Input 1 Output Audio Video AV RCA Switch 4 ways Selector Splitter Box

Opinions?

 

[sqlsavior]

I like my Promitheus TVC:

http://www.promitheusaudio.com/tvc.htm

(no affiliation)