Need help on MR77 and MC502 lamps

mike323

New Member
Hey,

Need a little information here. I need the lamp number for the stereo indicator on the MR77. Is it a GE 1828 at 37.5 volts? Is the lamp in the dial needle replaceable or does the needel have to be replaced?

On the MC502...

Are the lamps in the high and low windows plug-in type or are they soldered into the board? Any idea of the lamp number?

Thanks!!!!!!
Mike
 
Two versions of MR77, one with a lamp dropping resistor 37V lamp, other with no resistor 55V lamp, if you are not sure use the same type that you pulled out.
 
Back
Top Bottom