Panasonic SL-880 turntable

Wonder if it's interchangable with Technics 'tables? I would assume you could contact Technics for a replacement...it's worth a shot.
 
Nearly any short spindle will work -- or can be made to work with a Dremel tool and some sandpaper. This is because the diameter of a short spindle has to accommodate the hole in the center of a record.

Quite a few times, I've even taken a multi-spindle and used the Dremel tool to cut off about 80% of it -- to make a "custom" single-play spindle.

Fred Longworth
StereoTech Classic Audio Repair
http://www.repairaudio.com
 
Back
Top Bottom