rkic
Active Member
Does anyone have a service manual for the SX-1050 to sell, trade, give, etc...?
Thanks
PS I'm now able to start going through this receiver. Yesterday I took the bottom plate off and gave it a thorough air blasting and a little light scrubbing with a paint brush. I checked all 6 fuses - they all test fine.
Both relays work. I have 61 volts at the 22,000 uf caps. Things look promising.
Any additional checks/suggestions/comments would be welcome.
Thanks
PS I'm now able to start going through this receiver. Yesterday I took the bottom plate off and gave it a thorough air blasting and a little light scrubbing with a paint brush. I checked all 6 fuses - they all test fine.
Both relays work. I have 61 volts at the 22,000 uf caps. Things look promising.
Any additional checks/suggestions/comments would be welcome.