PM 700 DC Offset help needed

mcdmgb

AK Subscriber
Subscriber
Just recently got this unit and checked the DC offset. Both channels are running 40-50mV and I would like to lower it. I do not have a SM. Looking inside there are three pairs of pots that might adjust the offset. Anyone know which pair it might be?

Thanks,

Mike
 
Do yourself a favour and invest in the service manual if you want to tinker with these adjustments!

Having a reference document to walk you through the process is invaluable... a mistake can mean significant damage to your gear.
 
Well I would buy a manual if I needed to do other things to it, but buying a manual for a one time adjustment of the offset seems a little much.

Mike
 
I understand that its not bad and its probably within (barely) factory specs, but I would prefer it to be closer to 0.

Mike
 
Back
Top Bottom