Post Your Marantz Gear Here!!!

Discussion in 'Marantz Audio' started by AJXD, Nov 30, 2006.

  1. MacNoob

    MacNoob dazed and confused

    Messages:
    2,086
    Location:
    Longitudinal Center of Canada
    This one came from a garbage bin at wife's work! Only problem was missing power switch button. Has incorrect button now and new lamps.

    [​IMG]
     
    FOH Engineer, Te-Te and Chrisxo55441 like this.
  2. Chrisxo55441

    Chrisxo55441 AK Subscriber Subscriber

    Messages:
    2,201
    Location:
    Twin Cities Minnesota
    Nice save that Marantz deserves a better home then the dump :thumbsup:
     
    FOH Engineer and Te-Te like this.
  3. nu2dis

    nu2dis AK Subscriber Subscriber

    Messages:
    62
    Location:
    Orange County, NY
    Fully restored 2270
    • new film caps and matched transistors in the phono stage
    • increased phono stage filter caps per service bulletin
    • new speaker protection relay and drive transistors
    • new large amp filter caps
    • new input pair transistors
    • performed service bulletin for biasing transistor on both amps
    • converted all lighting to LEDs
    • restored oem walnut cabinet
    • and a partridge in a pear tree
    IMG_2135.jpg
     
  4. MacNoob

    MacNoob dazed and confused

    Messages:
    2,086
    Location:
    Longitudinal Center of Canada
    Don't see these ones too often.

    [​IMG]
     
    JT-3, schoocom, FOH Engineer and 2 others like this.
  5. Chrisxo55441

    Chrisxo55441 AK Subscriber Subscriber

    Messages:
    2,201
    Location:
    Twin Cities Minnesota
    They're coming. Just got something special :deal: arriving Thursday. I just might pee my pants from the excitement of waiting :banana::banana::banana::jump: :banana::banana::banana:Already gave a big clue this should be an easy guess.
     
    nu2dis likes this.
  6. J.P

    J.P New Member

    Messages:
    5
    2215B - needs a clean up ! - man looking at all these sleek machines makes me want to keep the one i found (above) in my dads storage.... ! They dont make em like this anymore.
     
    Last edited: Oct 11, 2017
    FOH Engineer likes this.
  7. Te-Te

    Te-Te Learning never exhausts the mind. Subscriber

    Messages:
    3,879
    Location:
    Dark Side of the Moon
    I don't even know what you're getting, but I'm excited to see. One more day.
     
    nu2dis and FOH Engineer like this.
  8. nu2dis

    nu2dis AK Subscriber Subscriber

    Messages:
    62
    Location:
    Orange County, NY
    Well, what were they? Please do tell...



    .
     
    Te-Te likes this.
  9. Chrisxo55441

    Chrisxo55441 AK Subscriber Subscriber

    Messages:
    2,201
    Location:
    Twin Cities Minnesota
    still unpacking should have pics up tomorrow possibly tonight, feel free to guess in the meantime, another hint they're a single number and if you look at my signature what would make me pee my pants over what i already have listed there.
     
  10. Chrisxo55441

    Chrisxo55441 AK Subscriber Subscriber

    Messages:
    2,201
    Location:
    Twin Cities Minnesota
    Ok changed my pants. Nobody guessed? So after a few years of trying and 3 failed deals i finally got my 9's :banana::banana::banana:
    will power them up tomorrow after i check the tubes. seller triple boxed them so i had to work to get them out but they arrived safe and sound. have to sell off a bunch of stuff now that i got these.

    20171012_203405 (800x450).jpg 20171012_204337 (800x450).jpg
     
  11. Te-Te

    Te-Te Learning never exhausts the mind. Subscriber

    Messages:
    3,879
    Location:
    Dark Side of the Moon
    Ohh Man!! Congratulations they look beautiful!
     
    Chrisxo55441 likes this.
  12. PooPoo

    PooPoo Member

    Messages:
    87
    IMG_5893.JPG
     
    JT-3 and schoocom like this.
  13. OutlawSun

    OutlawSun Member

    Messages:
    81
    Location:
    Texas
    I've got a Marantz 2230 that had a bad power switch, dead lights, and front end I ended up getting worked on. It deserved a new life. The pots were still scratchy when I got it back and the vellum paper had gone yellow and needed to be replaced. Took it apart last night carefully removed the faceplate and replaced the paper with a light blue vellum and then opened up the bottom to get at the pots. Still need to go buy deoxit but went ahead and used some contact cleaner for now as a first pass as it dries up quickly and did the job for flushing them out. Ended up using a light round of brasso polish on the metal work and used eyeglasses cleaner and cloth to clean up the plastic pieces. Also one of the corners had been slightly bent so lightly tapped it back straight. Loaned it to my girlfriend for the time being as I'm there more than I'm home these days. It sounds great and no more scratchiness. I want to eventually get one of the WC-22 cases but it's low on the to do list as I still have a Thorens TD 150 turntable that was a freebie that needs resurrecting. Also rocking a Marantz 6100 turntable.

    After:
    After IMG_7434.JPG
     

    Attached Files:

    MitchSF and Te-Te like this.
  14. santashooter

    santashooter Active Member

    Messages:
    183
    Location:
    Frederiksberg, Denmark
    So, recently got this pair i have been working towards a couple of years - this is in Denmark mind you, before there was any import so these a very rare on this side of the pond.
    Marantz Model 16 and 33 pre - they are mint and original (apart from a couple of changed caps - all changed with blue Philips to retain the original spec).
    they are beautiful in both physical presence, and sonic capabilities.
    PA280094.JPG
     
  15. FOH Engineer

    FOH Engineer Super Member

    Messages:
    4,566
    Location:
    Fenwick Island
  16. FOH Engineer

    FOH Engineer Super Member

    Messages:
    4,566
    Location:
    Fenwick Island
    image.jpeg
    2240. 140.
     
    Chrisxo55441 likes this.
  17. d0sk3y

    d0sk3y New Member

    Messages:
    40
    Location:
    Timisoara, Romania
    Here are mine:

    IMG_20171108_200712783.jpg

    Surround:
    Marantz SR5011 / Emotiva BasX A-300 (FL/FR power) , Marantz UD7007 (also as BD / DVD-A decoder)
    Focal Cobalt 815 fronts / Focal Cobalt CC20 center / Focal Opal 607 surrounds
    Pair of Infinity Infinitesimal 10" Servo Subs

    Stereo:
    Marantz PM6005, Marantz CD5004 (digital coax to PM6005's dac)
    Philips FP 930 (!) turntable with AT95E cartridge and Proel RCAs - actually built by Dual;
    Wharfedale Jade3s on Mission Stancette stands

    Argon and QED Performance interconnects, QED Performance Original speaker cables with dealer-applied QED banana plugs.

    Future plans are to move, stereo-wise, to a PM800x (say PM8005) and SA800x (say SA8005), as I totally adore the sound of Marantz.
    For video, I wil prolly get the successor of the UD7007 (which btw, can be had for about 500 euros now, and sounds brilliant in stereo) as soon as it comes out.

    Best wishes
    A
     
    MarZutra and Te-Te like this.
  18. MarZutra

    MarZutra Addicted Member

    Messages:
    5,013
    Location:
    New Scotland, Canada
    Picked up this little number today. Lovely sound but haven't tried any recording on it yet. IMG_3271.JPG
     
    Te-Te likes this.
  19. patrickmcc23

    patrickmcc23 New Member

    Messages:
    24
    I have a Marantz 2015 receiver in need of a clean, scratch free faceplate with all lettering, ect intact. There is a guy on eBay that makes the black faced, white lettered faceplates for assorted vintage gear, but needs 5+ serious buyers to produce the standard silver face, black lettering or black face, white lettering. I prefer the stock silver w/ black lettering. Any serious takers?
     
  20. scottyawd

    scottyawd Member

    Messages:
    51
    Location:
    Silicon Valley, California
    [​IMG]

    NR-1504 Receiver
    It was my first quality piece of gear.
     

Share This Page