stevestadler
Member
same result, I have a little bit of sound at max volume
problem with my 999
- Thread starter stevestadler
- Start date
petehall347
the brandy coffee man
thats narrowed it down to main amps then ..being both sides i would look at power supply voltages .
without reading the whole thread i am not sure where this is up to .
can you confirm idle biases and dc offsets are in tolerances ?
without reading the whole thread i am not sure where this is up to .
can you confirm idle biases and dc offsets are in tolerances ?
stevestadler
Member
Ok the left channel is working perfectly at full
the right channel doesn't work at all, the sound I was hearing was coming on the LEFT (the low volume) but I got nothing from the right channel
the right channel doesn't work at all, the sound I was hearing was coming on the LEFT (the low volume) but I got nothing from the right channel
petehall347
the brandy coffee man
check the speaker fuses for corrosion f001 f002 5 amp .. could also be corroded speaker switch . dont forget speakers and wiring .
stevestadler
Member
i just deoxit the the pod, i'm going to let them soak for the night, fuse holder are in great shape no rust, i only used 1 speaker that i switch from left side to right side
