the R disperses the sound better....sweet spot for sweet spot I like the K better
What is the Emit used in RSii called?
part number 49-0125 there are other part numbers as well!Basically it's a regular EMIT with a rectangular face plate.
I believe there are variations in screw hole placement, and possible font, among those rectangular face plate EMITs.
I know someone will correct me if I'm wrong.
part number 49-0125 there are other part numbers as well!
the planar/ribbon-style emits had a horizontal dispersion of 30º and a vertical dispersion of 18º (according to Arnie, earliest versions only 12º vertical). this accounts for why they were frequently seen stacked in the flagship models, and why the provision was made so they could be rotated in the single emit models, in the event the cabinets were laid on their side. infinity literature skirted around this by claiming "nearly perfect horizontal dispersion" but not mentioning vertical..
Yup, another variation.there are emits , like 49-0125 but have a thicker magnet.
X2I was under the impression that the limited vertical dispersion was an intentional design feature intended to limit reflections off the floor and ceiling.
490125 is the rectangular EMIT with the thick magnet structure. 490126 is the same except for a round faceplate. Later versions of 490125 were labled 902-5086. Later versions of 490126 were labled 902-5023.there are emits , like 49-0125 but have a thicker magnet.