remote speaker chan stopped workin

[jami w.]

hey guys this mornin i rurned on my reciever and the remote channel somethin happened. first id get static then music for a bit an it would cut out togther, but the mains are workin fine. anybody have any ideas what it could be?

 

[alexkerhead]

Prolly a bad solder joint, might want to check that first.

 

[Ave_Rapina]

Hello

Normaly the remote and main are connected to the same .
The comutation is given by an Relay or even the switch.
Maybe an problem on the switch or relay if this is the case .

Dry Joints or defective switch can be the problem

With an multimeter you can solve this tracking the conection with the Amplifier disconected from main, if the comutation is made by the switch.


Regards

 

[jami w.]

thanx fer the info