Removing port from KEF 104/2

slimecity

Super Member
Wondering if anyone has done this.

Mine are pretty firmly attached. I will be stripping my speakers right down, sanding and re-staining them.

Any help would be appreciated.

cheers
 
Awesome cheers - the most I have is a hair dryer (not mine BTW). Will give that a go

that might not be hot enough to warm up the gasket tape that's under the 1" thick bottom panel. But you could try. A heat gun is like $40.
 
Hmmm got the bottom panel off OK with a haridryer but this port still isnt budging with a bif ot heat and pulling.

argh
 
Back
Top Bottom