Sansui Frequently asked, and more...

Discussion in 'Exclusively Sansui' started by Morden2004, Feb 1, 2006.

  1. LBPete

    LBPete Rolling Along Subscriber

    Messages:
    10,771
    Location:
    Long Beach, CA
    Casey, it's not a copy of the existing database, it's a complete update as of yesterday. I'm all set up to maintain and update it. The updates just need to be posted on the database page. I don't have access to that.

    - Pete
     
  2. LBPete

    LBPete Rolling Along Subscriber

    Messages:
    10,771
    Location:
    Long Beach, CA
    Casey, here's a link to the current file from 2009. http://akdatabase.org/Sansui/Report2.pdf. That file "report2" needs to be replaced with the new file I gave you. The AK Database appears to be on a separate server. We need to find out who has access to it. Is there someone you can ask?

    - Pete
     
  3. x-rayrad

    x-rayrad New Member

    Messages:
    10
    Rebuilding the 9090DB Dolby board, anyone replaced the 1N60 diodes along with caps and transistors? Is it worth it?
     
  4. LBPete

    LBPete Rolling Along Subscriber

    Messages:
    10,771
    Location:
    Long Beach, CA
    I wouldn't change them unless they are bad. Very few people have a need for the functions that board provides.

    - Pete
     
  5. grindfix

    grindfix Active Member

    Messages:
    171
    I have found local NTE dealer can order NTE 605a diodes. They say that the part number has been discontinued for years but was revived.
    Most likely any NTE dealer will be able to order them now.
     
  6. Hyperion

    Hyperion Roobarb & Custard Subscriber

    Messages:
    39,518
    Location:
    Hertfordshire, UK
  7. grindfix

    grindfix Active Member

    Messages:
    171
    So, what is your recommendation to use on original F1040 Sansui board without damage?
    Thanks
     
  8. Hyperion

    Hyperion Roobarb & Custard Subscriber

    Messages:
    39,518
    Location:
    Hertfordshire, UK
    I am sorry I don't know the answer to that, especially as I have only just learned that you want this for a F-1040 board. (used in 5000x ?).

    May I suggest you start a thread and ask the question? - bear in mind that you may be advised to upgrade the board (as most people do) - there was a thread/post detailing exactly how to do this.
     
    Last edited: Jun 19, 2017
  9. LBPete

    LBPete Rolling Along Subscriber

    Messages:
    10,771
    Location:
    Long Beach, CA
    There is a lot of information on upgrading that board. The procedure starts in post 163 in the FAQ thread.

    Please post the serial number for the database. Click on the link in my signature block.

    - Pete
     

Share This Page