Scanners ?

[petehall347]

TID $56: Cylinder events tested and number needed to complete monitor.

Is this just telling me I've done a lot of tests ?

might be something to with readiness test like you have over there . we haven't got to that stage yet .

 

[Beatnik]

I just talked to the tech and he said basically don't worry about it if it's running good. No one can give a real answer. Sometimes it doesn't even show the #56 when I scan.

Battery cable clear the computer, start the truck and don't touch the pedal. Turn everything on ac/lights etc and let it learn idle.

It was hot out again today 90+ and seems it effects how smooth the idle is, but it's still not hesitating.

 

[Beatnik]

Strange I can get misfire info in forscan but not torque pro ?

 

[petehall347]

my scanner will show misfires in real time .

 

[Beatnik]

my scanner will show misfires in real time .

The Torque pro picture is supposed to be real time, but I can't get it to work.

 

[Beatnik]

I'm finding there seems to be no real answers to this. What system for what years (mode 6, hs/ms or both) what sensors you have, what the numbers are telling you. 2006 ford ranger 3.0, what can I read and what setup do I need to access the info.

Ford guy says he never uses mode 6, don't worry about it !

 

[Beatnik]

I got a lot of help on a couple of forums and found an O2 sensor was buggy. Today I finally got a CEL and one sensor threw a code. Luckily I've had all four of these new sitting on the kitchen counter for a few years, lol.