Show of hands

[avionic]

How many folks out there are missing the black anodized aluminum trim piece above the input selector switches on there C-xx models.

 

[whoaru99]

Present and accounted for on both the C-40 and C-80.

I am, however, missing one of the switch covers (like/similar to the metal covers on the input selectors) on a T-80. :thumbsdn:

 

[Chris Brown]

Mine is broken off on my C-80, just like in the picture Thankfully it doesn't stand out, especially with an amp on top.

 

[tubed]

All my C's are intact.
Only my CX-1000 was missing a plate or two(fixed that)

 

[avionic]

I have 3 units here that are missing that piece.(parts units)

 

[OMGCat!]

Have both on my C-80 and C-60. I'll have to keep an eye on them. Failing adhesive seems to be pretty common with buttons and trim from that era.

 

[stoutblock]

don't remember any of mine missing? I do remember all of the plastic tabs on the bottom that attach to screws were broken. C-4 is a better build.

 

[avionic]

I'm just trying to get and idea of missing pieces. Been thinking about getting a few of them made.
So if you don't have missing ones, its really not necessary to list non-missing ones.

These are only on the C-40/45/60/65/80 and 85.

 

[Dr. Ear]

Mine arrived without, too. Made a replacement from a 0.6 mm carbon sheet.

 

[avionic]

Mine arrived without, too. Made a replacement from a 0.6 mm carbon sheet.

Ooh sexy..

 

[mojoe]

I have a C-80 that is missing that piece