I am trying to help a friend with his recently acquired tape deck.
The left channel is so low it is almost non existent.
The belts are fine.
I cleaned the heads etc really good with alcohol.
I also used deoxit on the toggles, pots and the sliding switches on the underside of the board.
No change.
Anything else that could cause this?
The left channel is so low it is almost non existent.
The belts are fine.
I cleaned the heads etc really good with alcohol.
I also used deoxit on the toggles, pots and the sliding switches on the underside of the board.
No change.
Anything else that could cause this?