speaker distortion part 2

[VQLT]

What would cause distortion if it's not the driver? I took out what i thought was a bad midrange/ tweeter in my pioneer CS-33a's and put it in the other speaker cabinet and it worked fine. I then took the driver that i had just replaced and put in back in the original cabinet and it has distortion. therefore there must be something in the wires, x-over etc. any ideas?

 

[ByrdWyngs]

Just guessing, and I'm sure more knowledgable folks will chime in later, but it's probably a bad cap in the crossover.

 

[oldkardon04]

Just guessing, and I'm sure more knowledgable folks will chime in later, but it's probably a bad cap in the crossover.

either that, or test your amp, see if thats the problem.

 

[VQLT]

definitely not in the amp. it tried other speakers and encountered no problems at all. Also, it appears the distortion is only in a certain frequency range.