s-petersen
Scott
So..., I'm in the winter amp building mood again. I had a pretty beat up Stromberg Carlson Stereo 60 (ASR-444) and wanted to build a straight amp from it. This is how far it has progressed tonight.
The Chassis is a blemished SS Dynaco 70 chassis that is sometimes offered on the auction site.
I already had the cage, but it may not be used.The tube sockets on the front will likely go away, as they are completely useless.
I will have to make some resistance changes because the 2 6AV6's are gone. The amp will use 6L6GC output tubes
The speaker terminals are not the best, but they are better than the screws that were used in the Dynaco's
]
Schematic updated 2/15
The Chassis is a blemished SS Dynaco 70 chassis that is sometimes offered on the auction site.
I already had the cage, but it may not be used.The tube sockets on the front will likely go away, as they are completely useless.
I will have to make some resistance changes because the 2 6AV6's are gone. The amp will use 6L6GC output tubes
The speaker terminals are not the best, but they are better than the screws that were used in the Dynaco's
]
Schematic updated 2/15
Last edited: