Stevescivic
Active Member
Hello folks, can anyone here confirm if this is a good drop in replacement main filter cap for my SX-1050?
http://ca.mouser.com/ProductDetail/...GAEpiMZZMtZ1n0r9vR22W%2bftpzh3LyOt7n0b8xDD/4=
I measured my caps last night and it seems to be 64mm x approximately 105mm or so in height but I didn't undo the caps to measure the lead/screw terminal spacing.
Thanks,
http://ca.mouser.com/ProductDetail/...GAEpiMZZMtZ1n0r9vR22W%2bftpzh3LyOt7n0b8xDD/4=
I measured my caps last night and it seems to be 64mm x approximately 105mm or so in height but I didn't undo the caps to measure the lead/screw terminal spacing.
Thanks,