SX 780 connections broken - help me find out where they go

Luissx780

New Member
Hello,

I stupidly removed my rear panel from my SX780 the other day in an effort to open it. I unscrewed two screws right under the phono input and the rec input. These screws had black wire soldered to them and broke off. Now i'm wondering where to re-solder the wires -- I know that one end needs to be re-soldered to the screws, but don't know where the other ends go as they broke off. Are these grounds? I can't seem to find the proper schematic in the manuals.

Sorry for the quality of the pics and my poor explanation, I'm new to this.

Thanks in advance for your help!
 

Attachments

  • SX780 back.jpg
    SX780 back.jpg
    50 KB · Views: 17
  • SX780 screws.jpg
    SX780 screws.jpg
    61 KB · Views: 20
i cant zoom in on the pics . there will be tell tales where the wire came from .first is it will only stretch so far so you are in the zone . then there will be a broken bit of wire . might be hard to see if buried in solder .
 
Back
Top Bottom