petehall347
the brandy coffee man
plot thickens .. R11 that you pulled is odd . i see 9.1k on this schematic ..
It's a 1 Ohm resistor. Brown/black/gold/gold. I'm getting back into receiver now, will double check that is R11.check against the colour bands or writing on them ..
http://www.dannyg.com/examples/res2/resistor.htm
Pulled R71. Fuzzy schematic looked like 11. Will get to putting everything back in order and get correct measurements. Thanks for sticking with me.It's a 1 Ohm resistor. Brown/black/gold/gold. I'm getting back into receiver now, will double check that is R11.
Q7 AWR-101 2SC1318 NPN ECBWhen you find them, a quick/dirty check in place can help find trouble spots. Typical in-circuit resistance will be somewhat less than the design resistance. Anything higher usually indicates a problem area.