1. Time for some upgrades in server hardware and software to enhance security and take AK to the next level. Please contribute what you can to sales@audiokarma.org at PayPal.com - Thanks from the AK Team
    Dismiss Notice

What would this baby be??

Discussion in 'Fisher' started by The Fuxtor, Jun 28, 2018.

  1. The Fuxtor

    The Fuxtor AK Subscriber Subscriber

    Messages:
    2,756
    Location:
    Calgary, Alberta

     

    Please register to disable this ad.

  2. larryderouin

    larryderouin Turn it UP, POP? PLLUUEEEZZZZZEE Subscriber

    Messages:
    21,839
    Location:
    Glen Burnie Md.
  3. The Fuxtor

    The Fuxtor AK Subscriber Subscriber

    Messages:
    2,756
    Location:
    Calgary, Alberta
    :cool:Wow kinda Kool! Fisher EL34 monoblocks would be awesome!!
     
  4. larryderouin

    larryderouin Turn it UP, POP? PLLUUEEEZZZZZEE Subscriber

    Messages:
    21,839
    Location:
    Glen Burnie Md.
    It's a Receiver so monoblocks are out.
     
  5. The Fuxtor

    The Fuxtor AK Subscriber Subscriber

    Messages:
    2,756
    Location:
    Calgary, Alberta
    :(
     
  6. gadget73

    gadget73 junk junkie Subscriber

    Messages:
    36,787
    Location:
    Southern NJ
    Not impossible to make them, but you'd need to sacrifice a pair of these for their transformers.
     

     

    Please register to disable this ad.

  7. jonboy55

    jonboy55 Well-Known Member

    Messages:
    704
    Location:
    Long Island, New York
    It is the K-100 chassis but the tubes are EL-37's. Not EL-34's. By looking at the short base they look like Mullard's.

    They are similar to KT66 or 6L6 but there is really no cross to other tubes. They are not made any longer but some tube manufacturers say their 6L6 or KT66 will be OK to use as a substitute - but I would be careful.

    The record changer is a Garrard RC88/4.

    If you check around you will see the original EL-37 sells for a lot of money!
     

Share This Page