Working on SX 1250....question about filter amp board.

z-adamson

Addicted Member
I used mattsd's thread as a shopping list.

He lists 2 caps at 4.7uf, 50v and 2 caps at 10uf, 25v and that is what I bought.

These are tantalum caps, being replaced with aluminum electrolytic.

Well, in the middle of replacing said caps, and the 10uf caps that I am replacing say 35v and not 25v.

Should I use the 10uf, 25v caps I got? My gut says no.

I happen to have Nichicon Muse bipolar 10uf, 50v caps laying around. Would those work in this application? I recall hearing that replacing polar with bipolar is ok.

Thanks
 
Last edited by a moderator:
Back
Top Bottom