yamaha cr1000 no sound

I was able to achieve a clear signal on right and left channels using auxiliary inputs, however FM signal is very weal at full volume. Each strong signal will not go into stereo mode even though I have a strong signal. The Fm meters work as they should. Ideas? thanks
 
I am able to get a clear sound using the tape monitor inputs and both aux inputs. As mentioned before the FM stereo light will not illuminate however the AFC/station light does when a signal is there, signal strength meter works well but the tuning meter does not move from center. Ideas are appreciated, Again I have a very low FM signal when volume is all the way up. thanks
 
Back
Top Bottom