Yamaha PC2002M restoration

[SoCal Sam]

Some of the watt difference is the voltage difference.

 

[rottalpha]

Some of the watt difference is the voltage difference.

That should not matter at all.

 

[Oilmaster]

They printed 1600W as where they should have printed 600W

It's not a welding machine, ain't it?

 

[Cosmin2000]

Greetings! Is there any difference between your PC-2002M and this one (P-2200 European Version on 220V, with 1000W power consumption)?
https://www.olx.ro/oferta/vand-schimb-amplificator-de-mare-putere-yamaha-p2200-ID8TcDt.html
P.S.: Very good job, amr2!

 

[amr2]

P2200 is an earlier model, they are not the same, there are differences. It’s a very nice sounding amplifier, the only thing that I don’t like is it has no speaker protection circuit.

 

[amr2]

 

[amr2]

Ok, all adjustments done: power supply, bias and meters. DC offset < 2mV
I will post some pics ASAP

 

[amr2]

I hope you like it ...

 

[wajobu]

Beautiful work--I bet it sounds great!

 

[SoCal Sam]

As clean as can be, it looks brand new. Nice work. How did you get the tag off the face plate?

 

[rottalpha]

you are the

The amp is awesome...just as brand new.

 

[Bert 1100]

Just wow ! Beautiful work !

 

[avionic]

Outstanding as usual .

 

[amr2]

Thanks everyone!! It sounds nice, I like it

How did you get the tag off the face plate?

The tag is glued with double sided tape. This tape is thick, so you can use a cutter to start taking it off without touching the face plate. Once removed, clean the surface with alcohol.

 

[SoCal Sam]

Thanks everyone!! It sounds nice, I like it



The tag is glued with double sided tape. This tape is thick, so you can use a cutter to start taking it off without touching the face plate. Once removed, clean the surface with alcohol.

Good to know, thanks. I was thinking epoxy or something permanent. Double sided tape is no problem.

 

[Mark B]

Fantastic restoration!

 

[amr2]

I guess it will not interest anyone, but I want to share a cad drawing (dwg file) of the top cover, the botton cover and the faceplate.

 

[amr2]

It was my plan B

 

[Mr. Yamaha]

Great work!

 

[SoCal Sam]

It was my plan B

You were going to have them fabricated?