Audiokarma.org
Audiokarma Featured Sponsor

Go Back   AudioKarma.org Home Audio Stereo Discussion Forums > Modern Day Hi Fi

We appreciate your help

in keeping this site going.

FORUM RULES
Reply
 
Thread Tools Display Modes
  #1  
Old 10-25-2009, 11:49 PM
lucid lucid is offline
AK Member
 
Join Date: Jan 2009
Posts: 16
2 channel receiver - Denon or Integra or ?

I'm looking for a stereo receiver to replace my ailing 10 year old NAD (it's been ailing for a while). I've narrowed it down to two models. Outlaw, Marantz, Yamaha, Elite and HK have all be ruled out.

Denon DRA-697CI and Integra DTM-5.9 are the two front runners.

Must Have:
- RS232 controllable
- 12v triggers
- Pre outs
- Tuner

Very nice to have:
- 2nd Zone Pre outs
- Sub pre out

Right now I'm leaning towards the Integra because I like the front panel way better (discrete buttons for inputs and tuner presets). I'm open to suggestions for other receivers or a Pre/Pro with the same feature set as above. I have a few different power amps that I can use if need be. I don't really have a budget, but keeping it under $500 means more money for music and wine.

I've never used or owned Integra (or Onkyo) so I don't really know anything about their reliability or performance.
Reply With Quote
  #2  
Old 10-30-2009, 12:07 PM
KentTeffeteller's Avatar
KentTeffeteller KentTeffeteller is offline
Gimpus Stereophilus!
 
Join Date: Feb 2006
Location: Athens, TN
Posts: 3,919
I prefer separate power amp and preamp/processor as a rule. Integras are OK but not my preferred choice for music. I like Marantz gear better than any of the Denon line in sonics, warranty, build quality, and reliability. Much better after sales support. I had a client who bought a $3500 Denon receiver new. 2 months later it died. It took 15 months to get it back from Denon. Inexcusable for the price.

Last edited by KentTeffeteller; 10-30-2009 at 12:12 PM.
Reply With Quote
  #3  
Old 10-31-2009, 12:12 AM
lucid lucid is offline
AK Member
 
Join Date: Jan 2009
Posts: 16
Thanks for the response.

I've been looking for a pre/pro off and on for the last year. Every once in a while an Anthem AVM20 or something similar shows up on the used market locally, but I never get there in time.

As for Marantz, I have an SR5200 AVR and the tuner section is terrible which is one reason I haven't considered something like the Marantz SR4023. The other reasons are the lack of 12v triggers and no 2nd zone.

I spent some time with my brother's new Onkyo AVR yesterday and I basically like everything about it which is why I'll likely pick up the Integra once the dealer gets a demo unit it and I can have a listen.

I know separates are the way to go, but the WAF just doesn't work for me. Believe me, I've tried.
Reply With Quote
  #4  
Old 10-31-2009, 04:13 AM
terra1's Avatar
terra1 terra1 is offline
AK Member
 
Join Date: Jan 2008
Location: WA
Posts: 2,116
I have an Onkyo TX-SV909Pro AV Receiver with older Dolby Pro-Logic which is still going strong after about 17 years. Tuner sounds better than its specs. Discrete amps. 7 analog channels plus subwoofer predating discrete digital 7.1. Great for movies and not disappointing for music. I bought and expected it to be my last big purchase for years to come. That's still true and it's because of the well thought out design and features. And quality build and specs.

I also have an Onkyo TA-2090 tape deck which has been compared to Naks. Still works after pulling it out of storage and after cleaning -- works like new. Although not all models fair as well.

Also a 6 disc Onkyo DX-C909 which is built like a tank. No problems with it like some Sonys. So I bought used the next model down, a DX-C606, when I saw it at Goodwill for $19.99. Bought a single disc DX-706 from eBay which sounds very smooth and tends toward warm. None have any mechanical problems.

A 1055FII direct drive turntable which still holds speed.

So I have been very impressed with Onkyo quality over the years and as you say, user friendly control layouts and looks are very important as well.

The only thing I might add is if you are looking for a 2 channel receiver then you might look at a Sherwood RX-5502 or above but not sure it has all the tech requirements for you. If you hadn't eliminated HK I might have recommended looking there as well.

Last edited by terra1; 10-31-2009 at 04:20 AM.
Reply With Quote
  #5  
Old 11-01-2009, 08:54 AM
cbrworm cbrworm is offline
AK Member
 
Join Date: Oct 2007
Posts: 518
I have previously had, and liked: Onkyo TX-SV909pro and TX-SV919THX - they were both great for music and movies. The 919 was labelled as an Onkyo Integra, I don't remember the 909 labelling. The 919 had discrete multichannel inputs for external surround decoders - but ultimately I replaced it with a single unit (after about 10 years of daily use).

I now have, and am very happy with the TX-SR805 which is comparable to one of the higher Integra DTR lines (8.x?), but with a lower line video chip. It has plenty of power, sounds great, looks good. . .

I also have a tx-sr703 which works perfectly as a HT receiver for TV and movie duty.

My only complaint with the my current onkyo gear is that it is a long journey to change bass/treble/balance, etc. Perfect for movies and TV, but I prefer knobs on my 2 channel music gear. And they do run hot - if it is going to be in a cabinet airflow is a must.

I have not looked at any of the competition because I have always been so happy with Onkyo. In addition to the 4 units mentioned above, I also have an Integra A-8087 and another 2 channel receiver whose model number I don't remember (TX-802?) Every time I am ready to buy, I am quickly drawn back to onkyo.
__________________

DD:SX-1250,GX-270D-SS,Sony TC-K850ES,Onkyo DX-C206,Numark TT,GFA-555ii,HTPC,DEQ2496,RSIIIa

HT:Onkyo TX-SR805,ZA SR71,DIYMA12,HTPC

OOS:SX-1010, SX-1050, GX-270D-SS(#2), GX-280D-SS, GX-255,Technics SL-1800, Nak CD-6,INF QLS5,RS4001, Beta20, Seas LOKI
Reply With Quote
Audiokarma
  #6  
Old 11-01-2009, 09:23 AM
KentTeffeteller's Avatar
KentTeffeteller KentTeffeteller is offline
Gimpus Stereophilus!
 
Join Date: Feb 2006
Location: Athens, TN
Posts: 3,919
Your best tuners are generally vintage ones. There's a few good new ones but generally very high dollar. I would go entirely separate to get a better tuner due to that issue.
Reply With Quote
  #7  
Old 11-01-2009, 09:35 AM
jn229's Avatar
jn229 jn229 is offline
AK Member
 
Join Date: May 2008
Location: Ontario.
Posts: 496
Lucid:

My upstair's system is jamed into the dinning room's cornor. Therefore, sound is not that important, but a good tuner is. I was leaning towards the HK models. I am currious as to why you elminated these models.
__________________
DIY turntable-Moth 300, Cambridge 640, VTL 2.5, VTL ST150, DIY speakers in Sansui cabs.
Reply With Quote
  #8  
Old 11-01-2009, 10:21 AM
lucid lucid is offline
AK Member
 
Join Date: Jan 2009
Posts: 16
I'm well aware that vintage tuners are the way to get the best FM performance, I was the one that started this thread http://www.audiokarma.org/forums/sho...d.php?t=242571 and was promptly educated.

I don't remember specifically why I ruled out HK, but it was eliminated because it lacked something on my "must have" list. I was looking at the 3490 which seems to be their flagship stereo receiver.

Looks like it was missing RS232:
http://www.studio-22.com/harman-kard...HK3490back.jpg


cbrworm: The integra I'm looking at has discrete bass/treble. http://www.gspr.com/integra/images/dtm_59_front_300.jpg
Reply With Quote
  #9  
Old 11-01-2009, 12:14 PM
terra1's Avatar
terra1 terra1 is offline
AK Member
 
Join Date: Jan 2008
Location: WA
Posts: 2,116
Quote:
Originally Posted by cbrworm View Post
I have previously had, and liked: Onkyo TX-SV909pro and TX-SV919THX - they were both great for music and movies. The 919 was labelled as an Onkyo Integra, I don't remember the 909 labelling. The 919 had discrete multichannel inputs for external surround decoders - but ultimately I replaced it with a single unit (after about 10 years of daily use).
The 909 is also an Onkyo Integra. The 909 and 919 were top of the line offerings and you paid quite a lot to get what you got.

But yes, I would agree -- great for both music and movies. I had looked at several offerings back then and Onkyo just seemed to go that extra mile in specs, architecture, layout, and features. Had great reviews as well.
Reply With Quote
  #10  
Old 11-01-2009, 04:07 PM
cbrworm cbrworm is offline
AK Member
 
Join Date: Oct 2007
Posts: 518
Quote:
Originally Posted by lucid View Post


cbrworm: The integra I'm looking at has discrete bass/treble. http://www.gspr.com/integra/images/dtm_59_front_300.jpg

That looks pretty slick, I'll have to check it out.
__________________

DD:SX-1250,GX-270D-SS,Sony TC-K850ES,Onkyo DX-C206,Numark TT,GFA-555ii,HTPC,DEQ2496,RSIIIa

HT:Onkyo TX-SR805,ZA SR71,DIYMA12,HTPC

OOS:SX-1010, SX-1050, GX-270D-SS(#2), GX-280D-SS, GX-255,Technics SL-1800, Nak CD-6,INF QLS5,RS4001, Beta20, Seas LOKI
Reply With Quote
Audiokarma
  #11  
Old 11-01-2009, 11:46 PM
bre's dad's Avatar
bre's dad bre's dad is offline
I drank what?!?
 
Join Date: Mar 2006
Location: indiana
Posts: 706
Quote:
Originally Posted by lucid View Post
I'm looking for a stereo receiver to replace my ailing 10 year old NAD (it's been ailing for a while). I've narrowed it down to two models. Outlaw, Marantz, Yamaha, Elite and HK have all be ruled out.

Denon DRA-697CI and Integra DTM-5.9 are the two front runners.

Must Have:
- RS232 controllable
- 12v triggers
- Pre outs
- Tuner

Very nice to have:
- 2nd Zone Pre outs
- Sub pre out

Right now I'm leaning towards the Integra because I like the front panel way better (discrete buttons for inputs and tuner presets). I'm open to suggestions for other receivers or a Pre/Pro with the same feature set as above. I have a few different power amps that I can use if need be. I don't really have a budget, but keeping it under $500 means more money for music and wine.

I've never used or owned Integra (or Onkyo) so I don't really know anything about their reliability or performance.
I have an Integra 5.9. It replaced a Denon that was a few years old. My main complaint is the lack of a phono input, though it has plenty of inputs for an external and still be able to hook plenty of stuff up. The tuner section is actually pretty decent. It pulls in as well as some vintage tuners I have. A nice feature is the Zone 2 can be turned off and used to biamp speakers. I've got some biamp capable speakers but haven't taken the time to set it up. I've ran it on some Paradigm Studio 40's & some Martin Logan Aerius electrostats (which I normally run on my vintage McIntosh gear.) I like the Mac setup better, but its not really a fair comparison. I do prefer the Integra over a Pioneer SX-5580 (euro version of an SX-1050) I have. When demoing it in the store, I liked it much better than some similar Marantz & Yamaha gear (don't remember models.) It has a rich sound that's not too forward and has a decent sound stage. Some day I might try it as a preamp and see what happens but I'm not that motivated right now.

Some of the things that attracted me to it were some that you mensioned...

1. nice layout with discreet input buttons vs. a wheel or up/down selector like many receivers these days have.
2. Ease of use & setup... even my wife can use it. No offense to her, but she ain't the most technological person out there.
3. preamp outs: one day I may buy separate amps and go overboard on the home theater, but no time soon
4. descreet output stages for every channel.
5. Simple, straight forward remote. The Denon I had was a nightmare, buttons on both sides of the damn thing.

Other than the lack of a phono input (most receivers I've seen in the price range lack it) complaint I would say I have is that by default it plays in 5 channel stereo on all inputs. You can turn it off and set it up to play 2 channel by default but you have to dig a little in the setup menus. On yeah, the onscreen setup is nice and MUCH easier than trying to muddle your way through the options on the receiver's display.

Its a discontinued model now, so you should be able to find a deal on one. My local hi-fi shop knocked about $300 off the price and I got the last new in box one they had.
__________________
Main: McIntosh C28, MC2105, MR74, ML Aerius, Pioneer Elite PD65, Rega P1
Upstairs: SX-5580, DCM TF-350, Kyocera PL-701

Last edited by bre's dad; 11-02-2009 at 12:58 AM.
Reply With Quote
  #12  
Old 11-03-2009, 04:58 PM
plug-n-play's Avatar
plug-n-play plug-n-play is offline
AK Member
 
Join Date: May 2009
Location: In the Desert at last!!!!!
Posts: 46
I have had both Denon and Integra, Integra all the way for me, the Denon was overpriced and had reliability issues, Onkyo really kicks ass in this department, IMHO

Cheers!
Reply With Quote
  #13  
Old 11-15-2009, 10:20 AM
Yggdrasill's Avatar
Yggdrasill Yggdrasill is offline
AK Member
 
Join Date: Nov 2007
Location: Seattle, WA
Posts: 476
Second on Onkyo's quality. Based on my sample of ONE, I had terrific reliability with my Onkyo 5.1 surround receiver. Seven years and no problem.

The Outlaw Audio RR2150 might fit your bill, though I don't think it is RS232 controllable.
__________________
In use: KA-5500, KT-8300, Hitachi HD-A2, Onix LS-6s. Scott HHS-20 in the garage.

Lotsa other stuff in rotation.
Reply With Quote
  #14  
Old 11-15-2009, 10:58 AM
whoaru99's Avatar
whoaru99 whoaru99 is offline
AK Member
 
Join Date: Apr 2006
Location: MN
Posts: 8,906
I was going to suggest an Anthem TLP-1, but not sure it has RS-232 control.
__________________
push back against dubious claims that defy logic;
be on the lookout for misrepresentations;
question the lack of science when belief is the substitution;
be very skeptical when the denial of the laws of physics comes into play.

--jpaik
Reply With Quote
  #15  
Old 11-20-2009, 03:59 PM
geode's Avatar
geode geode is offline
AK Member
 
Join Date: Jun 2007
Location: Austin, TX.
Posts: 561
Onkyo builds some really good quality audio gear. I've had two HT receivers and a CD Player. Still have one Ht receiver and the Cd player. I think the Cd Player uses Wolfson DACs. Very nice sounding. I've never had a problem with any of it. And speaking of denon versus Onkyo,

The company started as Osaka Denki Onkyo which split and became = Denon
Reply With Quote
Audiokarma
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:16 AM.



Friends of Audiokarma
We appreciate your help in keeping this site going.
AudioClassics
Grant Fidelity
Turntable Depot
DIY Hi Fi Supply
Audio Doctor
Simply Speakers
Afforable$
DeWick Repairs
Audio Art Cable
Parts Connexion
Audio Atlanta
Audience-AV.com
Sound Stage Direct
Vintage Electronics Repair
FM DX Antenna
McIntosh Cabinets
 
Zebra Cables
Radio X
Venus HI-FI
vancouver audio speaker clinic
MCM Electronics
Politicalchat.org
Videokarma.org
 
 
 
 
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
©Copyright 2002-2009 AudioKarma.org, All rights reserved.