Japan ba-3k update

2 more NUDIES

A little bit of lacing.. and a new meter UNCRACKED front plastic
 

Attachments

  • IMG_2297.jpg
    IMG_2297.jpg
    106 KB · Views: 26
  • IMG_2298.jpg
    IMG_2298.jpg
    59.6 KB · Views: 26
And the NEWS

Westlake cabinets DONE
BA 3K #1 in the RIGHT stand
Putting some vent holes in the LEFT stand.
Japan 3K finished… and loading into the LEFT.
Decided to go with 2 BA-3K's in MONO VS the 5K ( so far ) ...
Going to wire the system up ( starting tonight & finishing tomorrow )
Will test with some L-100's
Movers coming MONDAY
 

Attachments

  • IMG_2645.jpg
    IMG_2645.jpg
    63.2 KB · Views: 29
  • IMG_2647.jpg
    IMG_2647.jpg
    63.8 KB · Views: 27
  • IMG_2657.jpg
    IMG_2657.jpg
    70.5 KB · Views: 33
Amps powered both work flawlessly in MONO which is 340 watts per speaker ( MUHAHAHA ) , light testing with 4311 JBL's . Tomorrow go to best buys to get some MORE cables and we will be ready for the MOVERS Monday ! I did smoke 1 drill motor though.. Alas poor Milwaukee you served me well ! ( maybe I can find some bits for you ) .
 
Best Father's day EVER ~

All day… but DONE.. Mover ready for tomorrow..
Brandon dropped by and gave me his X box 1
David helped ALL DAY.. stripped EVERY wire out of the system and started from scratch.. and watched Pirates 3 to put the ROUGH tune on the room… BOO YAH~
 

Attachments

  • IMG_2662_2.jpg
    IMG_2662_2.jpg
    58.8 KB · Views: 26
  • IMG_2660.jpg
    IMG_2660.jpg
    60 KB · Views: 29
  • IMG_2661_2.jpg
    IMG_2661_2.jpg
    81.1 KB · Views: 27
Thanks craggd....
I have a bit of a TO MUCH STUFF problem...
So I had to make stands for the Westlakes and I though... MAKE A HOLE...
I was going to run a single 5K for both but I had these sitting ... and I wind up with a tad MORE power per channel, since they are mono , less cross talk and I believe they will run cooler.Today is the MOVERS day to get the 365 LB BEASTS on the stands..

Everything is set... so it SHOULD be as easy as moving the small JBL's, Adding 2 lugs to the 14/2 speaker cables, and screwing those on the MONSTER TS strips...

My ONLY concern is I allowed 3/4 of an inch between the bottom of the stand & the rollers ( 4 HD casters rated for 600 lbs ) I hope the carpet padding doesn't SMOOSH so much that the bottom of the cabinet's will not roll easily....

Sweatin the details....

Mike
 
On line

With all the prep.. Movers took 1/2 hour... BOOM BABY !
Next Grilles...
 

Attachments

  • Westlake in pos L.jpg
    Westlake in pos L.jpg
    79.5 KB · Views: 22
  • Westlake in pos R.jpg
    Westlake in pos R.jpg
    65.4 KB · Views: 26
The stands have 4 600lb rated casters per stand...yes the roll smooth like 1 guy can move em.....now..

1 word .. accurate.. no HYPE... just full range MUSIC...
To be honest.. I haven't done that much critical listening YET.. still trying to clean up from the aftermath..Then my younger son has been hogging the living room to play on the new X box...!
Mike
 
Back
Top Bottom