How about we all share what we are using to power our Klipsch Loudspeakers

Brian Tambe

Active Member
I personally am using the Denon AVR 3300 A/V Receiver and it works superbly for music listening and provides a phenomenal movie watching / listening experience in Dolby Digital , DDSC Digital and DTS Digital Surround Sound decoding with superb precision.
 
Hmmm... I'm not sure I count as being a Klipsch owner as my Belle's were built by me and not in Hope, AR. But they are using a brand new pair of K-33 woofers, Crites A-55g mids, CT120 tweeters and a set of Type AA crossovers I built for them. So, if it "does" count, I use either a fully rebuilt Mac MC250 or a VTA ST-70 that I built.

The Carver amp hasn't been used on them although it's dead quiet being one of the MkII Opt 002 upgrades. But 104db+ speakers don't really need 450+ wpc.

20171225_110243-768x1234.thumb.jpg.9efc46888f9b2d7b4cebfd51f45da16f.jpg
 
Denon PRA-1500, Denon POA-2800 through Klipsch KLF 30's.
Brian, I also used to have a AVR-3300 until 2 years ago when it had problems that they were know to have. It was a really great AVR though. I got a Denon AVR X3200W to replace it and it was a learning experience after having the 3300 for around 17 years. I drive Klipsch Quartets, KLF C7, KG .5 and SW-15 with the X3200W.

IMG_2339 copy.jpg


Mike
 
On the left is my Sansui AU717, TU717, SE7 equalizer, and SC1330 cassette deck. On the right is my AU719, TU717, and an AU417, TU417.


armoire phone photo 2.jpg

Out in the old office in my warehouse, I have a Sansui 8080db powering my Klipsch KG2s and a pair of Fraziers that are off to the side out of the photo.

8080db and kg2.jpg
 
Denon PRA-1500, Denon POA-2800 through Klipsch KLF 30's.
Brian, I also used to have a AVR-3300 until 2 years ago when it had problems that they were know to have. It was a really great AVR though. I got a Denon AVR X3200W to replace it and it was a learning experience after having the 3300 for around 17 years. I drive Klipsch Quartets, KLF C7, KG .5 and SW-15 with the X3200W.

View attachment 1113162


Mike
 
Driving the Khorns with an ADCOM rig-GFA-555, GTP-500 II, Denon DCD 1500 CD Player. Forte's are at idle right now. Jealous of some of the systems on here!! Should have mentioned-both Khorns have brand new Crites caps, tweeters and woofers as well as new oem Klipsch fabric on all side panels-previous owner had a cat that LOVED to sharpen its claws on them!!
 

Attachments

  • IMG_3221.JPG
    IMG_3221.JPG
    73 KB · Views: 125
Very nice set up. I Love my 3300 and it's given me Zero problems. I keep it well ventilated and keep it clean.
Denon PRA-1500, Denon POA-2800 through Klipsch KLF 30's.
Brian, I also used to have a AVR-3300 until 2 years ago when it had problems that they were know to have. It was a really great AVR though. I got a Denon AVR X3200W to replace it and it was a learning experience after having the 3300 for around 17 years. I drive Klipsch Quartets, KLF C7, KG .5 and SW-15 with the X3200W.

View attachment 1113162


Mike
 

Attachments

  • 20180212_171416.jpg
    20180212_171416.jpg
    58.4 KB · Views: 59
Back
Top Bottom