speaker selector switch

  1. S

    Which of these speaker selector units would you buy?

    All available for about the same (low) price locally: Niles SPS-4 Sonance SS-4 HomeTech HTS-6 Musica SS-6 (The mfg. is actually Mitek, I think?) And a couple of "vintage" Radio Shack/Realistic units, probably from the 1970s. FWIW, I don't actually need six inputs, so that difference between...
  2. Alfmonster

    Amp/Speaker Selector switch recommendation to split use of speaker between Tube Amp/SS receiver

    Hi! Does anyone have a recommendation for an amp/speaker selector? I would like to safely split the use of my Falcon LS3/5a 15ohm between a MC225/MX110z and a MAC4100. I’m new to the selector world and so any help would be greatly appreciated!
  3. M

    Yamaha RX-A770 and Zone2 Impedance

    Hi, I've had a Yamaha RX-A770 for a few years with the Zone2 output sent to a pair of 6-ohm outdoor speakers. I wanted to add a second set of 6-ohm outdoor speakers in a different location, but be able to use either the first set of speakers, or the second set, or both. They would all be...
  4. C

    Is there such a thing as a clean speaker selector box?

    Have any of you found a speaker selector box that will handle four or more pairs of speakers, has quality connectors for the speaker wire, and does not decrease the volume or distort the signal? I have tried three or four different brands and none are adequate. Most are designed to control...
  5. PaperBoy007

    Help:Sony STR-GX10ES Speaker Selector

    Looking for some help, I have the GX10ES and my speaker switch doesn't work. Does anyone know the part number? The knob itself is fine it's the connection between the knob and the speaker jacks at the back. It plays thru both A and B, as if the A+B was selected, but won't go to just A or just B...
  6. Keneye

    Speaker Selector Switch Opinions

    I have 2 receivers and want them to play nice with one set of speakers. But the speaker selector set ups I see are in the $75-100 range. Unless I am Missing something, all I want is a manual switch to select receiver one or two. Any suggestions for a simple cheap way to achieve that? I have seen...
Back
Top Bottom