Recent content by Tracy Brink

I would like to ask those in the know if the tonearm base for these two models (Denon DP-59L/Denon DP-59M) are interchangable or not? I am considering purchasing this one (Denon DP-59L)for my Denon DP-59M, would like to know if it will install properly? Ebay Link below...

the volume and balance on the 1020 have no detectable effect on the speaker output, otherwise it seems to be up and working in concert with each other.

Hi group, I'm back. I realize now what I wanted to do is not possible. I was mistaken about how to recreate a sterio setup I had with a roommate many years ago. We had identicle receivers and identicle speaker pairs and he "bridged" them together with an rca cable. I want to recreate that setup...

That's not what I was hoping to accomplish. The CR2020 works fine as a stand alone, and I just had the power supply serviced. I've never had an external amp so I was unaware how they operated in conjunction with a receiver.

I dont know what he did but the front panel input selector doesn't have all the sources available. One is missing and one has switched it's position on the input knob. I don't really remember the exact situation it's been several years now. It's just been sitting around as a parts receiver, I...

Technics SL-BD22D - Pioneer PL-518 - Yamaha CR1020 - Yamaha CR2020 - JVC KD-D40 -Speakerlab 7WA

So I picked up this second receiver but the previous owner has made modifications and now the inputs and outputs don't work properly. So yes, it was my intension to use this as an amp to increase the combined power output to one pair of speakers. I was not aware that this could not be...

are you saying each receiver powers a separate pair of speakers? is there a way to just use the second receive as an amp that boosts signal to one pair of speakers?

I'd like to set up my stereo receiver to accept a second receiver as an external power amp. I've never done this, is it as simple as using RCA cables to connect the pre-out of the receiver to the main-in of the external amp? Does the control panel need to be configured in any particular manner...

I'm thinking maybe the grado Blue, not sure I should go up to a gold or the 8MZ. Much of my collection is older and thrifed vinyl.

Hello audio fans, I have a Grado F3E+ cartridge that needs a stylus. I'll be using this on a Pioneer PL-518. So if you could put any Grado stylus on this cartridge which would you choose?

I forgot, my little green led light (power indicater) opperates so I assumed the fuse was ok.

I looked at that fuse, the printing is so tiny I couldn't make out what size fuse it is. I'll try to figure it out, thanks.

I'll need to enlarge the opening about 3/8" in width and it is 3/8" smaller in height. I saw a photo on PE where someone applied a new oversized piece of mdf to make their install look clean. thanks for the advice, much appreciated.

I asked PE to suggest a replacement plate amp and they came back with this: https://www.parts-express.com/bash-300s-digital-subwoofer-plate-amplifier-300w-rms--300-750 The Bash 300S is $170, does this seem reasonable for a $400 (new) subwoofer? If I do decide to replace, what might trip me up...