Search results

Hi all I am not able to remove collar (which connects the hardshell ) from tonearm. I have tried heating up with solder iron, hair drier, kept in in hot water, used wd40, Acetone etc, but it doesn't even move. Regards Sachin

I have the same TT in sitting in a box since 6 years. I bought it from Japan, according to seller it had speed variation problem only on 45RPM. Couple of days back I removed the TT from box and plugged on using 110V stepdown converter. This TT needs 100V. The platter isn't moving, the strobe...

Hi I got this deck today. The lower corners of faceplate got bend in shipping. I wasn't able to close the cassette door fully, it remained open 10mm from the fully closed position. I adjusted the machenism, not it's closing ok. When I switch it on and played cassette, no output/sound. The vu...

Hi I am looking for FS2KM (high speed Mitsubishi mosfet) or equivalent for my Sony Playstation SCPH 1002. I was using it as CD player. I wanted to adjust gain and bias, when accidentally I blown the Mosfet and fuse. I am not able to find the mosfet locally. It would be helpful if anyone could...

Few years back I have got these drivers, full thread here http://audiokarma.org/forums/index.php?threads/university-312-triaxial-speakers.646168/ I have now started to build simple Reflex cabs suggested by University Sound for 6201 The design The design I have used 18MM MDF for the build...

This is very interesting design. Diy audio member created the this buffer. Here is a thread http://www.diyaudio.com/forums/analog-line-level/251413-kuartlotron-keantokens-simple-error-correction-superbuffer.html Having already built Pass B1, and DCB1. Hifivision member Joshua built it on...

After successful completion of some phonosteges, few Pass amps. We tried famous Class A Amp, Le Monstre from Jean Hiraga. It took 8 months to complete. PCB design is by FM and friend Omishra and good contribution from some Diy audio members. Cab design is by my friend and member nraghunadha...

I bought Elec Miracord 50H tt for my friend from him. TT is mint, and my friend liked it very much. Packing was superb!! It made safely all the way to India without a scratch. Mike(63pontiacgp) is a great person and responds quickly. Highly recommended. Regards Sachin

Hi all, I recently got one tuner. It is in near mint condition There is one problem though when I switches it on I could listen it for a min and saw smoke and dial lights went off. I checked inside. I saw one cap bulged and one and also one resister burnt. I think it was on board which provide...

Hi all, I am very lucky to get these drivers as a gift from a member at lencoheaven. I received them couple of days back. They are big and heavy. Packing was superb. I am listening to these drivers since I received them. I liked them very much especially midrange. They are playing very well in...

Hi, just completed our version of DCB1 buffer. I was using Pass B1 buffer with LDR volume control since last 2 years.I have heard many expensive preamp,but none could come close to B1. I only heard only good things about DCB1.My friend and FM Omishra designed these PCBs.I ordered few PCbs for...

Can anyone recognise this Pioneer cartridge.I got it gift from a member of another forum Regards Sachin

I want to use this motor for my DIY TT.Can anyone tell me which Dual TT had this motor? That will help me searching controller PCB to run this motor. Regards, Sachin

Completed last night ;) Soldered boards: Trial fitting Mosfets on heatsink Test fitting Wiring: Done :) Back Speakers connected after adjusting bias Listening :music: Regards, Sachin

Hi all, I have sourced all components for Amp camp Amp.Its a cute little Class A SE amp from Nelson Pass http://www.diyaudio.com/forums/diyaudio-com-articles/214808-amp-camp-amp-1-a.html PCB layout is little different than NP.It is designed by Rudi Ratlos from diyaudio PCBs: My friend...

I can get this cart under $100.It looks to be in good condition.I am currently using AT 15Ea,which I really like.Does AT31 will make any improvement ovr AT15Ea,and how does it compare with Denon Dl-103. Regards, Sachin

Hi all, I received Lenco L-75 from Germany few days back.One kind Lenco heaven member picked up locally at very good price and shipped it to me.I can't thank him enough.It came without tonearm and plinth which I don't need. Few Pics: Regards, Sachin

I have this cartridge without stylus.Can anyone tell me how good this cart is?My TT is Micro Seiki Mb14st.My other carts are At15ea and Ortofon Super OM10. Regards, Sachin

Hi, I have recently committed to buy a Pioneer Pl10 turntable(US model 110V 60hz).It will need a 50Hz pulley to perform correctly in India.One of my friend is having a dead Pioneer Pl A25 TT.Can I use its pulley in my Pl10 TT? Regards, Sachin

Greetings from India.Have a great B'day. Regards, Sachin

Greetings from India.Have a great one :beerchug: Regards, Sachin

Best wishes,have a nice one :beerchug:.You are one of the best on AK. Regards, Sachin

Hi, after months of thoughts I have decided to build this Amp.I have been reading DIY audio forums and exchanging Pms with AK members 1Mor, Renron, Omishra etc.I have seen few very good F5 builds here,Komi,Sirbird,Renron.1mor al built very nice looking F5s.We have finalised the BOM and received...

Please have a look at JICO's new website.N97xe has listed for $15700:yikes:http://stylus.export-japan.com/product_info.php?products_id=1526 Am I seeing anything wrong here:scratch2:

Greetings from India, Happy b'day Celt,have a great one. Regards, Sachin