njcanuck

Hi njcanuck,
dhnash had emailed a couple of manuals for the Teac Tascam Series 3 Mixer 11 Aug 2024 (see https://audiokarma.org/forums/index.php?threads/teac-model-3-mixer-goes-thump.888379/#post-17289894 post #8) but they haven't showed up in the AK Database. The last update is 16 Aug.
Would you know if they made it to the email (that I use) ak.pdfs@gmail.com ?
Sincerely,
John Graham.

The links to the akdatabase probably should have an https:// vs http:// here and in this this fourm. Thanks.

HI, the Service Manual for the Marantz 2245 which is in the AKDatabase is missing page 27. (page 27 is part of the parts list). I have copied page 27 for addition to the database. But I need your guidance as to how we accomplish this. Shall I make a pdf of the entire manual and swap it in the database? Or are you able to insert just the one page into the current database file.
Cheers,
Neil

Hey MacGyver do you have any of the parts you got way back for the Contra Bass servodrives?

Hi MacGyver
I was searching posts about restoring AR speakers I have 4 pairs so far and read your thread about AR-4x very helpful
but what interested me as much was your profile picture it appears to be a Austin Healey a 100-6 if I'm not mistaken
I have a 57 purchased in 1970 and is a restoration project at this time after many years of using it daily. Do you still have the one in the picture?

A while ago you posted about polarity of Klipsch titanium midrange drivers. I just ordered a set for my Choruses and I'm having the lack of polarity marking issue. Would it be at all possible for you to help me out by cracking one open and checking the polarity of the midrange drivers (assuming you still own the speakers)?

If you are unable to do so I completely understand.

Thanks,

Elijah

Hi MacGyver,
Im considering making some wide c cabinets for Scott 299 etc.
mfhale sent me a pm you may have interest.
if so let me know.Ive put a thread on bartertown.
Steve

You posted the following in 2011. I'm curious if you still have the PDF's you referenced below? If so, would it be too much trouble to ask you to forward those to my email address winjhox@gmail.com? If so, it would be very much appreciated. I've been wanting to locate a decent pair of these for years, and I finally think I have them located, but I'm anticipating they may need some updating. Your earlier message:

I didn't find any documentation on the TW1's in my travels around the Internet so I thought I'd post the instruction manual here (It's pretty low res, but hopefully readable). I've also offered a copy to the DCM web site for inclusion on their manuals page.

I have higher res PDFs of the Manual, a Promo Comparison to other speakers, and review reprints from Sensible Sound and Audio Critic. All are dated 77/78. I have sent them all to the AK database but I don't know if there room for them. You can PM me if you want copies.

Cheers, Rich

Hey buddy, do you still have the Crown DC300A?

Hi NJ,
About a week ago, I uploaded some Sansui literature I found in my basement. This was lit. that came with the Sansui system I bought 40 years ago and some other stuff. Did you get it? Let me know. I have some more that I can upload. Unfortunately, I couldn't figure out how to do it as a PDF, so I sent the files as JPEGs. I didn't see the files in the Sansui database.
EMark

I'm in Long Valley. Got paralyzed on my 66 Ducat Mk I 15 years ago. Shortly after that, I sold my Bugeye, 67 modded Mk IV Sprite, Lotus S7 and Tr-8 rdstr. (check out where they ended up: www.lanemotormuseum.com I have other sicknesses! I have a foreign car service in Kenvil (www.philscars.com). Do you know Kurt Hoffman-he lived in Hampton and was in to big Healys.

Welcome and where in NJ are ya? Is that your Healy?