Klipsch e-2 crossover for Heresy 1.5

[ray2001]

I just purchased a pair of Klipsch Heresy speakers. They are from 1984, Have the E-2 Crossovers. I am looking at the schematic that was on the Klipsch site. I only see one inductor coil, mine has two. I am going to replace the electrolytic caps with new Metalized poly film caps. Where on the schematic does the 2nd inductor go? I will use what is on the OEM board, but would like to find a correct schematic. I have a schematic that I think is from Bob Crites, can anyone tell me where on the schematic these inductors are? I see one inline with the woofer, then a T2A ? is that an inductor or some kind of transformer?

Thanks in advance for any help.

 

[winglet]

The t2a is an autoformer. It provides the attenuation for the mid and tweeter to reduce their output to a similar level as the woofer.

The woofer inductor is the component labeled 4 mH

 

[Gigantic]

A little more on the amazing autotransformer, or as its colloquially known, the autoformer.