• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Snade's attempt at "research" - JBL L26

Snade

humble AK member
This is funny because before joining AK the most "technical" thing I've done with audio gear is connect the speaker wires to the back of the receiver.

Project: Recap JBL Decade L26 (1974, two-way: 10" woofer and tweeter)

Suggestion: Zilch pointed me to some 80's JBL literature talking-up "bypass" caps placed in parallel to the regular cap. He said the L26 has only one cap and a simple crossover so it's a fun candidate to do some "research".

Benefits of recap and bypass cap (in theory): more definition, spaciousness, and dynamics.

Parts: Solen 8.2 uF cap (stock cap is 8.0) and Audiocap Theta 0.01 uF bypass cap. (cost of 4 caps = $20 at Parts Express).

Photo of Theta and Solen caps:

the_parts.jpg



The stock crossover and new crossover with the Solen and Theta caps. (Solen just glued to top of old cap with Goop - simple no mess removing old cap)

jbl_l26_recap.jpg



The JBL Decade L26 (note: 4 screws to left of tweeter hold crossover panel to inside, I just removed the woofer and unscrewed the crossover and it popped-out)

jbl_4.jpg


Results: I did a simple A/B test with one speaker with new caps and one speaker with stock cap (mono source). The difference was subtle, a bit more snap to a piano with the recapped speaker. But after doing the recap on both speakers and connecting to my Carver amps, the sound is more "open", I'm listening to my favorite Tony Bennett / KD Lang CD and the vocals are breathtaking - simply beautiful.

I liked these speakers before for their excellent dynamics and low-end punch for rock music, but now they have a very impressive vocal edge - a live and more detailed sound.

This is all subjective, of course. But these speakers rock.

That's the scoop. Snade
 
Register to hide this ad
Solens seem to benefit less from the bypass cap than Daytons, for example, but the proof is always in the listening when it comes to these "enhancements." :thmbsp:

As you may recall, we used to call these the "Advent Killers".
Without demeaning Advents, of course, indeed.

Snade has set them up beautifully.... :yes:
 
Snade, here's a suggestion on cap selection. Dayton makes a 1% cap, a tight-tolerance polypropylene, 027-242, which is a little cheaper than the Solen 5%, but should match better, one to the other, so that the speakers have a closer match in the crossover frequency. There is also a Dayton film & foil bypass, 027-450, for $0.69, each, which will save a bunch over the Thetas. I used those in the last pair of Epicure 100s that I refurbed.

Maybe something to keep in mind, if you decide to work on a different pair.
 
Snade, here's a suggestion on cap selection. Dayton makes a 1% cap, a tight-tolerance polypropylene, 027-242, which is a little cheaper than the Solen 5%, but should match better, one to the other, so that the speakers have a closer match in the crossover frequency. There is also a Dayton film & foil bypass, 027-450, for $0.69, each, which will save a bunch over the Thetas. I used those in the last pair of Epicure 100s that I refurbed.

Maybe something to keep in mind, if you decide to work on a different pair.

I just ordered these for my EPI 201's. I'm curious about the bypass effect.

I noticed Solens are +-5% like standard Dayton.
 
There is a 1% Dayton for about the same price as the 5% Solen. The 5% Daytons are less money than the Solens.
 
I may be next!

Oh, I forgot to mention, very nice pictures.

Thank you very much. :thmbsp:

Suspect my L-26s might benefit from this operation as well! :yes:
 
Listen to the Zilchster, now, re: bypassing JBLs:

Solens don't "need" bypass caps, but there's no harm in using them for potential additional benefit.

Daytons do, whether 1% or 5%, and the premium Theta is superior to the Dayton bypass caps.

I also have some polystyrene bypass caps, but haven't tried them yet.

If you want to go whole-hog, you charge-couple (aka "Bias) instead of bypassing:

http://audioheritage.org/vbulletin/showthread.php?t=3555
 
Listen to the Snade-ster. :D

These fricken L26 JBLs sound fantastic. Ok, maybe it is just the new Solens doing their thing, but I think the Theta caps are helping to produce this excellent dispersion and openness.

The Daytons are nice caps and I used them on my Rectilinear highboys with great results, but I'm liking this new setup on the Decade L26.

Not to question the Zilchster, he inspired me to take a chance and try to kick up the old JBLs a notch.

It's all fun. Snade
 
I had some advice from somewhere else about my NLA's. He seemed to be very knowledgable and said the small film bypass takes the edge off the new PP caps. Smooths them out. That sounded good to me. I sold my NLA before getting to re-cap.

Now I ordered the 5% Daytons and Dayton film bypass for my EPI 201 (also going to do 202's). Since I needed 4 caps for each pair and am short on cash I went with the Daytons. But I like Solens - used them in my AR 2AX and KLH 6's. No bypass though on those though.
 
Very nice pics.
How closely did you measure the old and new caps? I've often wondered wether the re-cap benefits (and bypass effect) are really a change to the XO by altering things with a different DCR, ususlly slightly lower. This could explain a lot of "crispness".
 
Heh.

Part of it is that I'm cheap.

Daytons with Thetas:

attachment.php


When Thetas approached $4.00 apiece, I reassessed. It's been Solens w/o bypass, or biased, ever since.

[I'll hafta take a new pic.... :p: ]
 

Attachments

  • Family Snapshot XOs.jpg
    Family Snapshot XOs.jpg
    34.3 KB · Views: 275
Back
Top Bottom