• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Audio Dynamics Corp .... ADC 404's

Woofie

New Member
Hi. I did a search on these in the forum and couldn't find any past reviews. I had limited success as well on the net.

Trying to find my 'past' by buying vintage, I found a real nice pair of these on an auction site. They are beautiful and sound so, well, full and rich. I can't believe these little boxs that think they're a floor speaker.

Any thoughts or comments would be appreciated. I am so temped to see what's inside, but I guess I'll just have to accept that these are sealed for a reason, and enjoy.


IMG_0059-1.jpg
 
Last edited:
Register to hide this ad
Congrats a great pair of small vintage speakers! I've got 2 pairs of ADC 404's and continue to be impressed by the capability of this little box to make darn good sound.

You're right, there isn't much info on them online but you will catch little items here and there if you really look hard. One of the items I read a few years back when I picked up my first pair was from a review done in early 70's where the 404's were compared favorably to the AR 4x's (a speaker twice their size).

They are sealed like Fort Knox! The grill does not come off and the back is sealed in place with some major adhesive. I would also assume that these are constructed on the inside similar to their big brother (the 303AX) and the drivers are attached from the inside using adhesive as well as screws, and the crossovers components are sealed to the board with a similar adhesive. These were not made to be dis-assembled and/or serviced. There is a thread on AK that someone posted about working on his ADC 303's and he had to cut into the speaker from behind to gain entry. I would leave 'em alone unless you simply have to get into them.

I have a number of different pairs of vintage speakers (ADS, AR, KLH, Allison) and my ADC 404's have the nicest cabinets of any of them. They have some of the most beautiful walnut veneer that I've seen on a consumer grade speaker, and the build quality and overall weight is impressive!

Enjoy those sweet little ADC's!
 
They have some of the most beautiful walnut veneer.....

I concur. My camera and lighting didn't display the true beauty in the wood. One thing I like about them. They are functional art nice enough to compliment any room's decor.

Thank you for the reply and info.
 
Ah, cool. Thanks for sharing.

($5.00 monthly..) lol

Past copies of High Fidelity Magazine listed the 404's in their June '66 issue. Other sources lists them released in '68. Hmmm.

June 1966
Ampex PR-10-4 tape recorder
Dynaco PAS-3X preamplifier
ADC 404 speaker system
Heathkit AR-13A receiver

I found what I believe to be the 6" drivers from the 404. The two pictured just above the horns. They show front and back.


http://www.canuckaudiomart.com/image.php?image=1180009&is_user=0
http://www.canuckaudiomart.com/image.php?image=1180002&is_user=0
 
Last edited:
I forgot about this thread.

A little update. I had the RK-100 amp and had it hooked up to a KLH Model 18 that I found. That poor tuner had been into and I think every coil had been turned haphazardly some time in its long life that it rendered it useless. Drifted constantly.

Recently, I found a RK-101 tuner that matched the amp and now both are joined, once again, and wired to the 404's.

The better half loves listening to classical through them with this setup.

I concur.

Until she leaves. Then it's Classic Rock. :)
 

Attachments

  • image.jpg
    image.jpg
    85.3 KB · Views: 97
Thanks!

Great thing is I have less than 50 bucks total in the tuner/amp/speakers setup.

What they all cost new back then (amp kit in '71- 69.95, tuner kit in '71- 59.95, 404's in '68- 49.95) equals to about $1,100.00 in today's money using one of those inflation calculators.

Egads!

Sometimes, the audio gods do smile upon us.
 
Last edited:
I picked up some ADC 404's and restored the cabinets on them as well. They do sound pretty good for their diminutive size. Sometimes good things do come in small packages.

20150215_234417.jpg
 
Congrats a great pair of small vintage speakers! I've got 2 pairs of ADC 404's and continue to be impressed by the capability of this little box to make darn good sound.

You're right, there isn't much info on them online but you will catch little items here and there if you really look hard. One of the items I read a few years back when I picked up my first pair was from a review done in early 70's where the 404's were compared favorably to the AR 4x's (a speaker twice their size).

They are sealed like Fort Knox! The grill does not come off and the back is sealed in place with some major adhesive. I would also assume that these are constructed on the inside similar to their big brother (the 303AX) and the drivers are attached from the inside using adhesive as well as screws, and the crossovers components are sealed to the board with a similar adhesive. These were not made to be dis-assembled and/or serviced. There is a thread on AK that someone posted about working on his ADC 303's and he had to cut into the speaker from behind to gain entry. I would leave 'em alone unless you simply have to get into them.

I have a number of different pairs of vintage speakers (ADS, AR, KLH, Allison) and my ADC 404's have the nicest cabinets of any of them. They have some of the most beautiful walnut veneer that I've seen on a consumer grade speaker, and the build quality and overall weight is impressive!

Enjoy those sweet little ADC's!

I also own a pair of ADC 404s. Grill clothes needed replacing, but not so easy as others have discovered! Both front and rear panels are socked in with adhesives.

First, I drilled an access hole on the rear panel then inserted a saber saw blade and cut across all four sides leaving about 1/8" lip from the inside cabinet wall. Out comes the guts including insulation. Now for the fun part. Front panel also glued but thankfully only as a filler and not between the panel edges and cabinet. I used a Dremel with a 1/8" ball bit to rout a relief cut through the glue bead. Then gently tapped panel from the front with a piece of hardwood and hammer. With the front panel removed you can now tap out the remaining rear panel pieces. Two+ hours and I'm only half done! 20190831_154610.jpg
 

Attachments

  • 2019-08-31 15.45.40.jpg
    2019-08-31 15.45.40.jpg
    56 KB · Views: 54
I just picked up a pair of these today at Goodwill for $25. Overall in great shape, beautiful wood, will probably refinish them. Haven't tested them out yet so hopefully they work.
 
I own a pair, one is intact. The other's grill is missing and the tweeter cone has a dodgy looking repair. The factory had only used 2 screws to secure the tweeter. The other 2 tweeter screw holes were not drilled into the baffle.
 
Back
Top Bottom